Rubber Feet (A1706/A1707/A1708/A1932/A1989/A1990/A2159/A2179/A2141/A2289/A2251) MacBook Pro Retina 2016 - 2020

Compatibility:
This pad is compatible with a wide range of MacBook Pro Retina and MacBook Air models produced between 2016 and 2020. Compatible models include the following references: A1706, A1707, A1708, A1932, A1989, A1990, A2159, A2179, A2141, A2289, A2251. It is also compatible with models identified by the following EMC codes: EMC 3071, EMC 3163, EMC 3072, EMC 3162, EMC 2978, EMC 3164, EMC 3184, EMC 3214, EMC 3358, EMC 3215, EMC 3359, EMC 3347, EMC 3301, EMC 3302, EMC 3348, EMC 3456. Specific models include, but are not limited to, MacBook Pro (13-inch, 2016, Four Thunderbolt 3 Ports), MacBook Pro (13-inch, 2017, Four Thunderbolt 3 Ports), MacBook Pro (15-inch, 2016), MacBook Pro (15-inch, 2017), MacBook Pro (13-inch, 2016, Two Thunderbolt 3 Ports), MacBook Pro (13-inch, 2017, Two Thunderbolt 3 Ports), MacBook Air (Retina, 13-inch, 2018), MacBook Air (Retina, 13-inch, 2019), MacBook Pro (13-inch, 2018, Four Thunderbolt 3 Ports), MacBook Pro (13-inch, 2019, Four Thunderbolt 3 ports), MacBook Pro (15-inch, 2018), MacBook Pro (15-inch, 2019), MacBook Pro (16-inch, 2019), MacBook Pro (13-inch, 2019, Two Thunderbolt 3 ports), MacBook Air (Retina, 13-inch, 2020), MacBook Pro (13-inch, 2020, Four Thunderbolt 3 ports), MacBook Pro (13-inch, 2020, Two Thunderbolt 3 ports).

Description:
The pad for MacBook Pro Retina and MacBook Air is an essential spare part for maintaining the stability and protection of your laptop. This pad is designed to replace worn or damaged pads located under your device, ensuring a non-slip surface and protection against scratches.

Features:
- Extensive compatibility with multiple MacBook Pro Retina and MacBook Air models.
- Precise design for a perfect fit.
- Non-slip surface for better stability.
- Protection against scratches and wear.

Usage:
The pad is used to replace the original pads of your MacBook that may wear out over time. It ensures that your laptop remains stable on various surfaces and protects the base of your device from scratches and other damage.

Installation:
1. Turn off your MacBook and unplug all cables.
2. Turn the laptop over and locate the worn or damaged pads.
3. Carefully remove the old pads using a thin, flat tool.
4. Clean the surface where the new pads will be installed.
5. Apply the new pads by pressing firmly to ensure good adhesion.

Conclusion:
The pad for MacBook Pro Retina and MacBook Air is an indispensable spare part for maintaining the stability and protection of your device. Easy